Spokes

Rear hub 14mm nickel chromoly axle with 6mm broach 6016 hub today with 2 sealed bearings 1pc chromoly driver with 3 sealed bearings 4 pawl driver with individual leaf springs for precise engagement Proprietary plastic non-drive side hub guard 24t ratchet ring, 15 degrees of engagement Flange diameter: 54mm Pitch center diameter: 45mm Center to flange: 25.2mm Holes: 36 Weight: 550g w/guard Colors: Black, Red, Polished Front hub 14mm chromoly center axle with 3/8” bolts 6016 alloy hub body / 7075 collars Longer 35L 3/8” bolts to adapt to any peg configuration 2 sealed bearings 2 Proprietary plastic hub guards Flange diameter: 47mm Pitch center diameter: 38mm Center to flange: 31.8mm Holes: 36 Weight: 320g w/guard Colors: Black, Red, Polished Rims The design of the Shadow Truss rim is focused around the same principles as modern bridge design in architecture. Considering the effects of compression as well as tension, the Shadow Truss rim is designed as a very rigid structure and one that transfers the load from a single point to a considerably wider area. These details create a stronger and more impact resistant rim to keep you rolling. Double walled, 38mm wide rim Centerline spoke drilling Increased spoke area to limit spoke pull through and increase structural integrity internal chambers with bridge inspired design Heat treated 6061-T6 alloy with welded seam 36 Hole Weight: 17.75 oz. ERD: 389.6mm

- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs

Straight pull spokes and nipples from Zipp

CX-Ray 298mm Straight pull spokes fit every position of the Rise 60 (B1), 29" wheel. - Length: 298mm - Spoke Interface: Straight Pull

3-pack, 298mm CX-Sprint Straight-Pull External Black Roam 60 29 Wheels

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

Odyssey racing spokes use butting dimensions that are tailor-made for BMX racing, and they’re still strong enough to handle some light street riding too. You’ll save roughly an ounce per wheel on 36’s. Only the best stainless steel has been used, and the gradual butting transitions are ideal for the stresses that a 20-inch wheel has to endure. - Proprietary professional-grade stainless steel. - BMX specific butting transition dimensions.

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

Champion 2.0 Black Spokes - One 264mm spoke = 7g

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

- Straight gauge stainless steel, bag of 36, includes 14g silver nipples - 281mm lengths are for most high-flange track hubs and velocity deep V rims - 308mm spokes are designed to be cut and re-threaded for desired length

Premium grade 14-gauge stainless steel spokes available in the appropriate BMX lengths, and in a ton of awesome colors! Product Specifications - Material: Premium Grade Stainless Steel - Gauge: 14g - Length: Assorted - Quantity: 40pc per pack - Weight: 8.3oz per pack

Premium grade 14-gauge uncut and unthreaded stainless steel spokes. These spokes must be cut and threaded by a spoke machine before use. Product Specifications - Material: Premium Grade Stainless Steel - Gauge: 14g - Length: 320mm (Uncut & Unthreaded) - Quantity: 40pc per pack - Weight: 14.5oz per pack

High-quality straight gauge stainless steel spokes. Includes 40 black spokes and 40 silver brass nipples. - Material: Stainless Steel - Gauge: 14G - Quantity: 40

Affordable straight gauge steel spokes. Includes 40 black spokes and 40 black brass nipples. - Material: Steel - Gauge: 14G - Quantity: 40