Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

BMX

$11.95
24MM INDENT SPINDLE CENTER SPACER FOR USE WITH ALL FIT 24MM CRANKS 51.5mm WIDE ALUMINUM ANODIZED RED
$35.99
FIT 24MM HOLLOW SPINDLE FOR INDENT CRANKS
$34.95
48 SPLINE COMPLETE BB KIT 19MM
$59.95
This is a Limited Edition Reissue of Mike Aitken’s Signature Stem. Made in USA. SPECS > Reach 53mm Rise 23.9mm (upright), 4.8mm (inverted) Material 6061-T6 Aluminum Weight 11.5 oz (326 g)
$59.95
This is a Limited Edition Reissue of Mike Aitken’s Signature Stem. Made in USA. SPECS > Reach 53mm Rise 23.9mm (upright), 4.8mm (inverted) Material 6061-T6 Aluminum Weight 11.5 oz (326 g)  
$59.95
The legendary BF stem is back! At just over 28MM tall it’s in the middle of our Aitken and High-Top stems. With two lengths to choose from and a classic look that doesn’t sacrifice strength with any unnecessary machining. Made in USA. SPECS > Reach 48mm, 51mm Rise 28.66mm (upright), 2.84mm (inverted) Material 6061-T6 Aluminum Weight 9.9 oz (280 g), 11.1 oz (315 g)
$7.95
SINGLE SPINDLE BOLT FOR 3PC 24MM INDENT CRANKS
$14.95
FIT 24MM BEARINGS (1 PAIR BEARINGS ONLY)
$7.95
SINGLE SPINDLE BOLT FOR 24MM BLUNT CRANKS ACCEPTS 8MM OR 6MM ALLEN WRENCH
$34.95
24MM MID BB KIT INCLUDES: 5X 1mm STEEL SHIM SPACERS 1X 51.5mm CENTER TUBE SPACER 2X SEALED 24mm BEARINGS. 1X 10mm CNC SPACER 1X 3mm CNC SPACER 2X SEALED 24mm BEARINGS.FOR MID BB
$99.95
Details BLADE V.3 Our goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Blade V.3 is available with a traditional 33mm offset. Here are a few features that make these forks so strong. Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection. Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture. A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race. Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li> Post weld 4Q Baked heat-treatment SPECS > LEGS DROPOUTS STEERER TUBE STEERER TUBE LENGTH COMPRESSION AXLE TO CROWN OFFSET WEIGHT HEAT TREAT Seamless Swaged (No Welded Cap) Investment Cast 1 Piece CNC-Machined 4130 CrMo M24 X 1.5 Thread - 6mm Allen Slot 320mm 33mm 2.25 lb (1.02 kg) 4Q Baked Post-Weld
$14.95
A grippy, durable tire. Inflated Width: 2.1” Inflated Diameter: 12” Max Inflation: 60 PSI Weight: .81 lb (367 g)
$14.95
A grippy, durable tire now available in 14" X 2.10" size. Inflated Width: 2.1” Inflated Diameter: 14” Max Inflation: 60 PSI Weight: .97 lb (440 g)
$19.95
A grippy, durable tire Inflated Width: 2.22” Inflated Diameter: 16.4” Max Inflation: 60 PSI Weight: 1.13 lb (513 g)
$99.95
Details SHIV V.3 Our goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Shiv V.3 is available with a quick 25mm offset. Here are a few features that make these forks so strong. Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection. Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture. A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race. Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li> Post weld 4Q Baked heat-treatment SPECS > LEGS DROPOUTS STEERER TUBE STEERER TUBE LENGTH COMPRESSION AXLE TO CROWN OFFSET WEIGHT HEAT TREAT Seamless Swaged (No Welded Cap) Investment Cast 1 Piece CNC-Machined 4130 CrMo M24 X 1.5 Thread - 6mm Allen Slot 320mm 25mm 2.25 lb (1.02 kg) 4Q Baked Post-Weld
$59.95
Jordan Hango Signature Stem. Made in USA. SPECS > Reach 48mm Stack Height 28.5mm Rise 24mm (upright), 6mm (inverted) Clamp Bolts 8×1.25mm (x4) Pinch Bolts 8×1.25mm (x2) Weight 11.85 oz
$24.95
The HIGH-TOP V.2 top load stem features a cast aluminum body with recessed sides and bottom section to reduce weight, a counter bore for your compression bolt, and a forged 6061-T6 aluminum top plate with machined FIT logo. SPECS > Reach 51mm Stack Height 32mm Rise 35mm Clamp Bolts 8×1.25mm (x4) Pinch Bolts 8×1.25mm (x2) Weight 12.15 oz
$2.95
PINCH BOLT (1X) FOR 8 SPLINE 19MM CRANK ARMS WITH WASHER
$10.95
Featuring slightly thicker ribs than most grips to cushion savage drops.  -163mm length  -Extra soft and tacky rubber -No Flange  -Black Bar Plugs included   SPECS> Length 163mm Diameter 31mm Durometer Soft
$9.95
From trail riders to street riders and racers, this grip is loved by all for its immediately broken in feel and tackiness.  Proprietary extra soft and tacky Thermal Plastic Rubber Medium diameter Matching Bar Plugs included American Made by ODI SPECS >  Length 140mm Diameter 31mm Durometer Soft 
$59.95
Van Homan Signature Stem. Made in USA. SPECS > Reach 53mm Stack Height 28.5mm Rise 24mm (upright), 6mm (inverted) Clamp Bolts 8×1.25mm (x4) Pinch Bolts 8×1.25mm (x2) Weight 12.3 oz
Page 1 of 1